With a used Cisco vendor, you should get Cisco switches, routers and other networking equipment at up to 90% off the retail price. The equipment should be backed by a top guarantee that is as good as or better than for brand new Cisco equipment. For example, the typical level of warranty to look for should be a 3-year warranty with advance equipment replacement services for the first year. With a strong warranty like this, you will have extended coverage, the unrivaled performance of fully-refurbished network hardware, and of course, peace of mind with regards to your investment.

Best Practices for Used Cisco Buyers

You want to save on your I.T. expenditures, and you figure that acquiring refurbished Cisco equipment could be a viable option. But you are a newbie; you have never procured used Cisco before, and it is difficult to ascertain what characteristics are important in a seller. You are concerned that you might be taken advantage of… someone could unload a useless, poor-performing lemon that ends up costing the company money. Perhaps you are thinking about buying on an online auction which could carry high risk and no guarantee that you’re going to get what you paid for or that the equipment is actually what is advertised. These are all very logical fears. However, with thorough up-front investigation and attentiveness, it is likely that you will find a trustworthy vendor who can give you advice on how to stretch your budget as far as it can go.

Following are some critical items to consider when searching for a seller to supply superior used Cisco hardware for your network infrastructure:

Is the refurbished Cisco hardware covered with a comprehensive warranty?

Read the rest of this entry »

I hope I’ll explain this so that the majority will understand it, in order that they can finish their own drywall, simply. It’s difficult to do, it took me quite a few years, before I became good at finishing drywall.

The key to finishing drywall, is practice makes perfect and do not ever forget that. I will explain the method, but you’re the one that must get a particular feel for applying the drywall mud and finishing the drywall properly.
I’m presuming that you have already applied the drywall and now it’s time to start applying the drywall tape to the joint appears. Here is a little trick, I prefer using paper drywall tape in the corners and fiberglass tape for the flat seams.
The fiberglass drywall tape has a self sticking adhesive and can be rolled on, before the drywall mud is applied. The paper tape, must have a layer of drywall mud applied, first, before applying the drywall paper tape.
I recommend using at least a five in. drywall trowel for this application. Here’s another drywall tip, I like to employ a 12 in. cement trowel, for finishing my drywall seams. Let your first layer of joint compound dry, before applying your next layer. You will simply continue spreading the drywall mud evenly, till your seams are flat and unnoticeable.

After you have applied at least three coats of joint compound and it has dried completely, it’s time to sand the area until it is smooth and ready to color.
More useful recommendation from Ocean County Drywall the best in the business.

Do Your Own Drywall
Spackle like the Pros

Article Source : Do Your Own Drywall : ArticleBase

Myths and misconceptions surround the market for refurbished Cisco equipment, creating unnecessary fear, uncertainty and doubt. Many of these misconceptions have been precipitated by OEMs; no doubt because some have admitted they look upon the used Cisco market as their No. 1 competitor.

To set the record straight, it’s time to debunk some of the commonly heard myths about refurbished Cisco equipment.

Myth #1 – The Secondary Market = The Gray Market
In reality, the two markets should not be painted with the same brush. Read the rest of this entry »